School is kicking my ass.
The maxi blew out the brass bushing on the end of the crankshaft (after 15-20k miles of abuse) and for some reason i cant seem to break the counter-shaft nut off to get at it. So i've been riding the peugeot, which is running better but still really crummy. Dead spots all over the power band, very little power. I ported the cylinder a little bit just opening the exhaust and eyebrowing the transfers, which pulled up the top end but now my low end really sucks. Its jetted at about an 80, with the needle all the way lean, and running really wierd.
I think its definitely time to re-wind the ignition coil. Shaw suggested i just cut off the outer windings, which would probably work well, but i'm going to kick it up a notch while i have everything apart and re-wind it with heavier gauge wire and maybe a few more turns. Hopefully that will solve all my problems, but who knows. I'm not sure what stock compression is in these, but it feels pretty good. I might try milling the head a little bit, but its not high on my list of priorities.
I needed to take a break from homework a couple nights ago so i made this... pretty much sums up what my life has been about the last 3 or 4 weeks.